: : Product Catalog > Hardware
| Custom Original Joint Protectors Custom Radial Joint Protectors Balance Screws Connecting Screws |
Radial Tap Radial Pin Weight Screw Spanner Wrench Collars |
Balance Screws
Radial Balance Screws tune the weight of a cue and move the balance point forward or backward. They can be placed in various parts of the handle to achieve any desired balance, and help to compensate for lighter woods or materials in a cue’s design. Both long and short balance screw options allow for maximum weight tuning from within the cue.
• Long Brass Balance Screw
(1.0 oz / 28.4 grams)
• Short Brass Balance Screw
(.50 oz / 14.2 grams)
Collars
Select a Collar based on weight and wall size. A thin wall collar is available for lighter weight needs. The pre-tapered and threaded option provides more forward balance and higher durability.
• Thin Wall – .755" ID X .852" OD X 1.00"
(.50 oz / 14 grams)
• Pre-tapered and Threaded Wall – .8420" TO .8520" X 5/8-18 ID X 1.00"
(1.3 oz / 36 grams)
Connecting Screws
Radial Connecting Screws join the cue’s forearm to the handle. Choose from two different weights depending on what balance your design requires.
• Aluminum Connecting Screw
(.40 oz / 11.3 grams)
• Brass Connecting Screw
(1.20 oz / 34.1 grams)
Custom Uni-Loc Original Joint Protectors
Use the Custom Original Joint Protectors to protect your cue and its Original Joint.
• Prevents dirt from falling into the insert
• Keeps your joint and joint facing clean for an optimal fit
Custom Radial Joint Protectors
Use the Custom Radial Joint Protectors to protect your cue and its Radial Joint.
• Prevents dirt from falling into the insert
• Keeps your joint and joint facing clean for an optimal fit
Radial Pin Weight Screw
Utilize one of two options to customize the handle’s back end weight.
• Brass
(.83 oz / 23.5 grams)
• Aluminum
(.31 oz / 8.7 grams)
Radial Tap
This little jack-of-all-trades can be used anywhere that Radial-shaped screws, connecting screws and weight screws will fit, or anywhere you place pins, connectors or balance pins. Various sizes are made for diameter and fit requirements.
• Under Size – creates a smaller pitch diameter than the pin for a tighter fit
• Nominal Size – best for a standard fit
• Over Size – creates a larger pitch diameter and a looser fit
Spanner Wrench
When a cue requires special cratsmanship and weight balance, use the spanner wrench to install your radial pin weight screws. Every Uni-Loc weight screw has spanner holes that match up with the wrench, for a perfect fit every time. And using these weight balancing tools will guarantee only qualified individuals adjust the cue's back-end weight.
